Seats : Cobra : Alloy Side Mounts Low
Alloy Side Mounts Low
Cobra Seats 'New Low-Profile' alloy side mounts manufactured from 5 mm high-tensile aluminum for superior quality, fitment, and strength. For use with the latest versions (2019 & 2020) of the Monaco Pro, Imola T, Suzuka T, and Sebring TLP (Std. & GT sizes) competition seats, as well as the Nogaro sport seat achieving the lowest mounting position possible in the vehicle. Cobra Low-Profile Alloy side mounts are newly designed with a lower side saddle for the side grommets to sit in and with the original standard height holes and new lower positioning holes. Principally you can now drop the Imola, Suzuka, and Sebring shell bottoms directly onto the lower mounting flanges of the side mounts. "Low as you can go" and only available through Sube Sports or Sube Sports' dealers! FIA Approved. Available in black powder coat with Cobra die-cut vinyl livery. NOTE: Cobra Seats are only approved for usage with Cobra Seats original side mounts as per FIA Homologation. Use of any other mountings will invalidate the seats FIA approval and will also invalidate it's warranty. Use only the bolts originally supplied with your Cobra Seat. Minimum specification: M8 X 1.25, 12.9 tensile strength. FIA mandates that you must use mounts constructed from a minimum of 3mm steel plate or 5mm aluminum. If you are not using Cobra side mounts then your seat may not be eligible for certain events or sanctioning bodies as the seat is only FIA approved with the manufactures mounts. If you are using a proprietary mount from another manufacture, please consult with your race sanctioning body before installation. On most mounts, you will find that one set of holes (to the seat) are slotted to allow the changing radius length when adjusting height and angle of the seat. These slots in the side mounts are designed to be used at the front, thereby placing the majority of the load from the seat on the back holes, which are holes with less tolerance and therefore capable of higher loads.